INSTALLATION

New 8 inch chimney system

BIS fireplace with stone work by Ken Espie

Jotul wood stove replacing an unwanted masonry fireplace (fireplace opening has been sealed up)

Maximum height allowed for this brand of double-walled pipe at 21 feet (see next image)

This is the bottom half of the same installation (see previous image)

Blaze King Ashford 30 connected to stainless steel relined and insulated masonry chimney

Missy, Chancy and me

Blaze King Sirocco 30 connected to a stainless steel relined and insulated chimney (for best performance)

Echo Choice Cab50 pellet stove

New 7 inch chimney system for older Certified Findlay Oval cook stove

Large modern insert installed into 1930's masonry fireplace

Jotul F3CB cast iron wood stove

Osburn Soho wood stove

Blaze King Ashford 30 wood stove with newly installed insulated, wall thimble - repurposing a chimney that once served an inefficient basement furnace. The chimney was also relined and insulated.

Before: Improperly constructed fireplace and chimney with poured sand for health and no clearance for the masonry chimney (see next image)

After: New Osburn fireplace insert with concrete hearth. The chimney has be relined and insulated to correct the lack of clearance issue (see previous image)

Osburn fireplace with veneer - real, slate 'ledge' stone

Attending demonstration of 'mass heater' construction